|
DR-LONDRIV-AX LonWorks driver (no LON Card) |
|
|
|
|
|
|
| controllers. Requires separate purchase of NPB-LON communications card (See below in this section) to facilitate LonWorks communication. If two NPB-LON cards are used in the WEB-600 controller, only one LonWorks software driver is required. Must provide t |
|
|
|
|
IO-16-H I/O Module 16 Point |
|
|
|
|
|
|
| (8) UI, (4) Form A Relay Outputs and (4) 0-10VDC Analog Outputs. I/O combinations can include up to four (4) I/O-16 Modules or up to two (2) I/O-16 Modules and one (1) I/O-34 Module |
|
Data Sheet
|
|
|
|
IO-16-REM-H WEBs-AXTM Remote I/O Module |
|
|
|
|
|
|
| Specifications- Inputs (8) Universal Inputs - Type 3 (10k) Thermistors, 0-100K ohms, 0-10 VDC, 0-20 mA with external resistor
Outputs (4) pilot duty relay outputs (Form A contacts, 24 VAC @ .5 amp rated), (4) analog outputs (0-10 VDC)System Capacities (16) max per WEB-600 (15) max per SEC-H-600, (4) max per WEB-201 Power, 12-15VDC, 2.0 W max
|
|
|
|
|
|
IO-34-H I/O Module 34 Point |
|
|
|
|
|
|
| (16) UI, (10) Form A Relay Outputs and (8) 0-10VDC Analog Outputs. Also includes onboard Power Supply I/O combinations can include up to four (4) I/O-16 Modules or up to two (2) I/O-16 Modules and one (1) I/O-34 Module |
|
Data Sheet
|
|
|
|
NPB-2X-RS485 Dual Port RS 485 Option card |
|
|
|
|
|
|
| Up to two of any NPB card can be installed in a WEB-600 controller. The recommendation for the WEB-201 controller is a maximum of one NPB card. |
|
|
|
|
NPB-LON Lon Card |
|
|
|
|
|
|
| 78 Kbps FTT 10 A LON adapter. Uses one of the two communication slots in the JACE 2 / 6. LON driver must be purchased separately. |
|
|
|
|
|
NPB-MDM Modem |
|
|
|
|
|
|
| JACE 2 or 6 Series 56K Dial-up Modem. Installation of the modem disables the on-board RS232 port. |
|
|
|
|
NPB-PWR-H 24VAC Power Supply |
|
|
|
|
|
|
| 24V AC/DC Power Supply Module, DIN Rail Mountable. Not required with purchase of IO-34-H |
|
|
|
|
|
NPB-PWR-UN-H Universal Power Supply Module 90-263 VAC input |
|
|
|
|
|
|
| 90 - 263 V AC 50 / 60 Hz Auto sensing Power Supply Module, DIN Rail mountable. Not required with purchase of IO-34-H |
|
|
|
|
|
|
NPB-RS232 Single Port RS-232 Option Card |
|
|
|
|
|
|
| Up to two of any NPB card can be installed in a WEB-600 controller. The recommendation for the WEB-201 controller is a maximum of one NPB card. |
|
Data Sheet
|
|
|
NPB-WPM-US Wall Adaptor (plug) |
|
|
|
|
|
|
| 90-240 VAC, 50/60 HZ Wall Adaptor, US plug type |
|
|
|
|
WEB-AX-EMB Embedded Workbench for NXS |
|
|
|
|
|
|
| License for WEBPro programming tool to be served via WEB Controller. Controller must have WEB User Interface licensed. |
|
|
|
|
WPM-2W Wall Adaptor (2 wire hook up) |
|
|
|
|
|
|
| 90-240 VAC, 50/60 HZ Wall Adaptor, US plug type FOR J-700, SEC-J-201 & SEC-J-601. 2 wire hook up |
|
|
|
